Whatsapp
Posted : Sunday, May 12, 2024 09:47 PM
*Eaton’s PSD Power Systems Division division is currently seeking 2 Controls/ Test Engineer to join the team.
* _Please note the salary information shown above is a general guideline only.
Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.
_ RELOCATION OFFERED - 100% on site in Nacogdoches, TX *What you’ll do:* The Test/ Controls Engineer is responsible for supporting plant leadership in achieving business and financial goals by developing and maintaining robust testing and assembly processes.
The Test/ Controls Engineer is responsible for portions of design, development, fabrication, validation, installation, support and troubleshooting of production test equipment and programs.
This position supports the technical side of equipment purchasing, provide requirements, attend all MOC, attend supplier review, equipment run-offs at side, assist with equipment start-up, automated conveyor, controls schemes for ovens, IT set-up of hardware product development and continuous improvement cost out initiatives across the organization.
This position is involved in and leads cross functional project teams comprised of both local and extended team members at a highly proficient level.
* Provide guidelines for the design and selection of manufacturing and test equipment.
* Support, service, and trouble shoot test equipment and electrical systems within the plant * Develop equipment specifications ensuring compliance with electrical safe work practices and OSHA requirements.
Identify potential safety hazards and provides input into the remediation process, ensuring equipment functionality meets required specifications.
* Enforce safety expectations, document and communicate hazards and unsafe conditions to ensure a zero-incident culture and product conformance to electrical safety and quality standards.
* Work with manufacturing, MESH, manufacturing engineering, quality, product design engineering, suppliers, and customers as needed.
* Performs root cause and failure analysis.
Applies critical thinking and problem-solving skills to provide specified cost, quality, and performance in a safe and efficient manner.
Teaches others in critical thinking and problem solving.
* Guide and instruct the capital equipment selection process.
Develop and evaluate Capital Appropriation Requests (CAR's) for major new product or process programs and initiatives related to testing/controls.
* Leverages advanced technology and innovation to improve the use and effectiveness of information systems for testing/controls.
* Seeks opportunities to eliminate waste associated with the flow of factory floor test information.
Leads projects, develops project goals, budgets, and work breakdown structures.
Proactively aligns cross functional resources such as Production, Quality, EHS, Maintenance, Engineering, and contractors/vendors to ensure that project goals are met.
Develops and executes communication plans among project/program working groups, associated leadership teams, and other stakeholders.
* Responsible for executing sustained change management as it applies to processes within manufacturing operations.
*Required Qualifications* * Bachelor’s Degree in Electrical Engineering or relevant field * Minimum of 3-5 years of experience/ internship in support of a manufacturing environment * Experience with PLC, HMI programming and safety systems design.
* Experience in many computer programing software such as visual basic/studio, SQL, and other Microsoft applications.
*Preferred Qualifications:* * Experience with Rockwell Software (RS and Factory Talk) * RSLogix 5, RSLogix 500, RSLogix 5000, Studio 5000, FactoryTalk View ME, FactoryTalk SE, VB6, NI LabVIEW and NI TestStand *Skills:* * Project Management experience * Demonstrated ability to interpret regulation and standards, and implementing Electrical Safe Work practices such NFPA 70E.
We are committed to ensuring equal employment opportunities for all job applicants and employees.
Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.
Job Types: Full-time, Permanent Salary: $88,000.
00 - $120,000.
00 per year Benefits: * 401(k) * 401(k) matching * Dental insurance * Employee assistance program * Employee discount * Flexible spending account * Health insurance * Health savings account * Life insurance * Paid time off * Referral program * Tuition reimbursement * Vision insurance Schedule: * 8 hour shift * Monday to Friday * Overtime Application Question(s): * Do you have experience in a manufacturing environment? Experience: * PLC HMI: 1 year (Required) Work Location: In person
* _Please note the salary information shown above is a general guideline only.
Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.
_ RELOCATION OFFERED - 100% on site in Nacogdoches, TX *What you’ll do:* The Test/ Controls Engineer is responsible for supporting plant leadership in achieving business and financial goals by developing and maintaining robust testing and assembly processes.
The Test/ Controls Engineer is responsible for portions of design, development, fabrication, validation, installation, support and troubleshooting of production test equipment and programs.
This position supports the technical side of equipment purchasing, provide requirements, attend all MOC, attend supplier review, equipment run-offs at side, assist with equipment start-up, automated conveyor, controls schemes for ovens, IT set-up of hardware product development and continuous improvement cost out initiatives across the organization.
This position is involved in and leads cross functional project teams comprised of both local and extended team members at a highly proficient level.
* Provide guidelines for the design and selection of manufacturing and test equipment.
* Support, service, and trouble shoot test equipment and electrical systems within the plant * Develop equipment specifications ensuring compliance with electrical safe work practices and OSHA requirements.
Identify potential safety hazards and provides input into the remediation process, ensuring equipment functionality meets required specifications.
* Enforce safety expectations, document and communicate hazards and unsafe conditions to ensure a zero-incident culture and product conformance to electrical safety and quality standards.
* Work with manufacturing, MESH, manufacturing engineering, quality, product design engineering, suppliers, and customers as needed.
* Performs root cause and failure analysis.
Applies critical thinking and problem-solving skills to provide specified cost, quality, and performance in a safe and efficient manner.
Teaches others in critical thinking and problem solving.
* Guide and instruct the capital equipment selection process.
Develop and evaluate Capital Appropriation Requests (CAR's) for major new product or process programs and initiatives related to testing/controls.
* Leverages advanced technology and innovation to improve the use and effectiveness of information systems for testing/controls.
* Seeks opportunities to eliminate waste associated with the flow of factory floor test information.
Leads projects, develops project goals, budgets, and work breakdown structures.
Proactively aligns cross functional resources such as Production, Quality, EHS, Maintenance, Engineering, and contractors/vendors to ensure that project goals are met.
Develops and executes communication plans among project/program working groups, associated leadership teams, and other stakeholders.
* Responsible for executing sustained change management as it applies to processes within manufacturing operations.
*Required Qualifications* * Bachelor’s Degree in Electrical Engineering or relevant field * Minimum of 3-5 years of experience/ internship in support of a manufacturing environment * Experience with PLC, HMI programming and safety systems design.
* Experience in many computer programing software such as visual basic/studio, SQL, and other Microsoft applications.
*Preferred Qualifications:* * Experience with Rockwell Software (RS and Factory Talk) * RSLogix 5, RSLogix 500, RSLogix 5000, Studio 5000, FactoryTalk View ME, FactoryTalk SE, VB6, NI LabVIEW and NI TestStand *Skills:* * Project Management experience * Demonstrated ability to interpret regulation and standards, and implementing Electrical Safe Work practices such NFPA 70E.
We are committed to ensuring equal employment opportunities for all job applicants and employees.
Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.
Job Types: Full-time, Permanent Salary: $88,000.
00 - $120,000.
00 per year Benefits: * 401(k) * 401(k) matching * Dental insurance * Employee assistance program * Employee discount * Flexible spending account * Health insurance * Health savings account * Life insurance * Paid time off * Referral program * Tuition reimbursement * Vision insurance Schedule: * 8 hour shift * Monday to Friday * Overtime Application Question(s): * Do you have experience in a manufacturing environment? Experience: * PLC HMI: 1 year (Required) Work Location: In person
• Phone : NA
• Location : 2315 SE Stallings Drive, Nacogdoches, TX
• Post ID: 9095817830
